RIIMPO321D Conduct Front End Loader Operations (wheeled)

Tuesday, March 17th, 2015

Course Overview

This course covers the required skills and knowledge required to conduct civil construction wheeled front end loader operations in Civil Construction. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors.

This course covers the following content:

  • Plan and prepare for tracked front end loader operations
  • Operate front end loader
  • Attach, secure, lift, carry and place
  • Relocate the front end loader
  • Carry out machine operator maintenance
  • Conduct housekeeping activities

Conduct Front End Loader Operations (wheeled) is delivered in two components; theory and practical. The practical component aims to teach students the necessary practical skills required for everyday operations of a wheeled front end loader. The trainer will specify the amount of practice (log hours) required after formal training is completed, this is dependent on an individual’s capability. Note: Learners may require additional log hours to those included in the course to achieve competency.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification however participants must be 16 years of age and must be able to supply Photographic I.D.

This course targets those working in operational roles in the civil construction industry.

Outcomes

The student’s competency will be assessed through the completion of theory and practical exercises. Upon successful completion of the course, a nationally recognised Statement of Attainment and a Competency Card will be issued to each student.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

RIIMPO322D Conduct Front End Loader Operations (tracked)

Tuesday, March 17th, 2015

Course Overview

This course covers the required skills and knowledge required to conduct civil construction tracked front end loader operations in Civil Construction. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between States, Territories, and Industry sectors.

This course covers the following content:

  • Plan and prepare for tracked front end loader operations
  • Operate front end loader
  • Attach, secure, lift, carry and place
  • Relocate the front end loader
  • Carry out machine operator maintenance
  • Conduct housekeeping activities

Conduct Front End Loader Operations (tracked) is delivered in two components; theory and practical. The practical component aims to teach students the necessary practical skills required for everyday operations of a tracked front end loader. The trainer will specify the amount of practice (log hours) required after formal training is completed, this is dependent on an individual’s capability. Note: Learners may require additional log hours to those included in the course to achieve competency.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification however participants must be 16 years of age and must be able to supply Photographic I.D.

This course targets those working in operational roles in the civil construction industry.

Outcomes

The student’s competency will be assessed through the completion of theory and practical exercises. Upon successful completion of the course, a nationally recognised Statement of Attainment and a Competency Card will be issued to each student.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

RIIMPO323D Conduct Civil Construction Dozer Operations

Tuesday, March 17th, 2015

Course Overview

This course covers the required skills and knowledge to conduct dozer operations in Civil Construction Industries. Licensing, legislative, regulatory and certification requirements that apply to this course can vary between States, Territories, and Industry sectors.

Course content covers the following:

  • Plan and prepare for dozer operations
  • Operate dozer
  • Select, remove and fit attachments
  • Relocate the dozer
  • Carry out machine operator maintenance
  • Conduct housekeeping activities

Conduct Dozer Operations is delivered in two components; theory and practical. The practical component aims to teach students the necessary practical skills required for everyday operations of a dozer. The trainer will specify the amount of practice (log hours) required after formal training is completed, this is dependent on an individual’s capability. Note: Learners may require additional log hours to those included in the course to achieve competency.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification however participants must be 16 years of age and must be able to supply Photographic I.D.

This course targets those working in operational roles in the civil construction industry.

Outcomes

The student’s competency will be assessed through the completion of theory and practical exercises. Upon successful completion of the course, a nationally recognised Statement of Attainment and a Competency Card will be issued to each student.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

TLILIC2001A Licence to Operate a Forklift Truck

Tuesday, March 17th, 2015

Course Overview

This course covers the required skills and knowledge for the operation of a powered industrial truck equipped with a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments, for licensing purposes. This also includes a truck on which the operator is raised with the attachment for order-picking.

This course requires the operator to be able plan the work, conduct routine checks on the forklift, shift loads in a safe manner, and shut down and secure the equipment after the completion of operations. The course content is based on the requirements of the National Standard for Licensing Persons Performing High Risk Work and meets State and Territory licensing requirements.

Course Duration

We hold group classes at our premises in Palmer Street, Portsmith and are able to deliver training onsite if required.

Part A –Classroom based theory component for approximately 8 hours, consisting of theoretical and practical training components.

Part B – Industry placement at worksite for practical component. Participants must complete practical experience on a construction site under direct supervision of a licensed forklift operator.

Once log book hours have been completed, final assessment will be scheduled in with participant and trainer.

Eligibility

As this course is classed as a High Risk Licence, participants must be 18 years old.

Outcome

Upon completion successful applicants will receive an assessment summary (AS1) from the accredited assessor as well as a statement of attainment.

Students will need to lodge licence applications and pay relevant fees online application for a new Queensland HRW Licence  which must be completed within 60 days of successfully completing the practical assessment.

This course is delivered by Training Services QLD, RTO Provider Number: 41551.

TLILIC2005A Licence to Operate a Boom-Type Elevating Work Platform (Boom length 11 metres or more)

Tuesday, March 17th, 2015

Overview

This course covers the required skills and knowledge to operate a boom-type elevating work platform (boom length 11 metres or more) for licensing purposes. It involves the operation of a telescoping device, hinged device, or articulated device or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work. The 11 metre boom length shall be taken to mean the greater of the following:

  • The vertical distance from the floor of the platform to the surface supporting the elevating work platform with the platform at its maximum height; or
  • The nominal reach, measured horizontally from the centre point of rotation to the outer edge of the platform in its most extended position.

This course requires the participant to plan the work, conduct routine checks, set up elevating work platform, operate elevating work platform and shut down and secure elevating work platform. The course content is based on the requirements of the National Standard for Licensing Persons Performing High Risk Work and meets State and Territory licensing requirements.

Course Duration – 1 day

We hold group classes at our premises in Palmer Street, Portsmith and are able to deliver training onsite if required.

Part A –Classroom based theory component for approximately 8 hours, consisting of theoretical and practical training components.

Part B – Industry placement at worksite for practical component. Participants must complete a minimum of 40 log book hours of practical experience on a construction site under direct supervision of a licensed EWP worker.

It is the participant’s responsibility to gain the practical logged hours elsewhere as Training Services does not have the facilities to provide these hours.

Once log book hours have been completed, final assessment will be scheduled with participant and trainer.

Eligibility

As this course is classed as a High Risk Licence, participants must be 18 years old.

Outcome

Upon completion of the final practical assessment, the participant will be issued with a Nationally Recognised Statement of Attainment to then be lodged with Australia Post for licensing.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

HLTAID001 Provide Cardiopulmonary Resuscitation

Monday, March 16th, 2015

Course Overview

This course aims to provide participants with the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Training is completed face-to-face in a classroom environment with theory content including practical demonstrations, group discussions, scenarios and other interactive learning techniques to ensure that all participants gain an understanding of the first aid skills.

Provide CPR covers the following content:

  • Legal and other issues
  • Cultural issues
  • Basic life support
  • Cardiopulmonary resuscitation and use of an automatic external defibrillator
  • Debriefing and welfare

Students will be assessed through written assessment pieces, demonstration of practical skills, participation in role plays and analysis of case studies.

The recommended industry standard to maintain current competency is for this course to be refreshed every 12 months.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification.

This course targets everyone in general from administration clerks working in an office environment to aged care workers working in facilities that require this qualification, as at any time of any day, these skills can save lives.

Outcome

On successful completion of the course, participants will be issued with a nationally recognised Statement of Attainment.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

SITHFAB201 Provide Responsible Service of Alcohol

Wednesday, March 11th, 2015

Course Overview

This course covers the Responsible Service of Alcohol (RSA) skills, knowledge and requirements, under State and Territory Liquor Licensing Law, for employees engaged in the sale or service of alcohol. In most cases all people involved in the sale, service and promotional service of alcohol in licensed premises must be certified to this standard.

Eligibility and Target Audience

There are no entry qualifications for this course however participants must be 16 years of age.

This course targets all levels of personnel involved in the sale, service and promotional service of alcohol in licensed premises. Those selling or serving alcohol may include:

  • Food and beverage attendants
  • Retail liquor sales persons
  • Winery, brewery and distillery cellar
  • Door staff and supplier sales representatives

It also applies to security staff who monitor customer behaviour and to the licensee who is ultimately responsible for RSA management.

An RSA Certificate is required for work in hospitality establishments such as:

  • Clubs
  • Hotels
  • Resorts
  • Restaurants

Outcome

Upon completion of this course, participants will have gained the required skills and requirements for serving and selling alcohol as per above. Participants will be issued with a nationally recognised Statement of Attainment.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

RIIWHS204D Work Safely at Heights

Wednesday, March 11th, 2015

Course Overview

This course covers Working Safely at Heights in resources and infrastructure industries such as civil construction, coal mining, drilling and metalliferous mining. The course is delivered via theory and practical components with content covering:

  • Identifying the work requirements
  • Legislation and Regulation and Standards
  • Work procedures and instructions for the task
  • Accessing, installing and correct use of equipment
  • Performing work at heights
  • Cleaning up the work area

Eligibility and Target Audience

There are no prerequisites for this course.

The course is relevant to those who work at heights and use safety harnesses and fall arrest equipment or those that are required to supervise others that work at heights.

Outcomes

Upon successful completion of both theory and practical components, participants will be deemed competent and will be issued with a nationally recognised Statement of Attainment and a course Competency Card.

This course is delivered by Training Services QLD, RTO Provider Number: 41551.

RIIMPO317A Conduct Roller Operations

Wednesday, March 11th, 2015

Course Overview

This course covers conducting roller operations in the civil construction industry.  It includes: planning and preparing; conducting machine pre-operational checks; selecting, removing and fitting attachments; operating and relocating the machine; and carrying out operator maintenance and clean up.

Conducting roller operations is delivered in two components; theory and practical. The practical component aims to teach students the necessary practical skills required for everyday operations of a roller. The trainer will specify the amount of practice (log hours) required after formal training is completed, and this is dependent on an individual’s capability. Note: Learners may require additional log hours to those included in the course to achieve competency.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification however participants must be 16 years of age and must be able to supply Photographic I.D.

Outcomes

Students competencies will be assessed through completion of theory and practical exercises. Upon successful completion of the course, a nationally recognised Statement of Attainment for the unit RIIMPO317D Conduct Roller Operations and a course Competency Card will be issued to each student.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec

HLTAID003 Provide First Aid

Wednesday, March 11th, 2015

Course Overview

This course aims to provide participants with the skills and knowledge to respond safely and effectively in first aid situations until the handover to medical professionals is possible.

This course is based on the latest Health Training Package (HLT) and has been designed using recommendations from Professional Industry Associations including the Australian Resuscitation Council, Diabetes Australia (Queensland) and Anaphylaxis Australia just to mention a few.

Training is completed face-to-face in a classroom environment with theory content including practical demonstrations, group discussions, scenarios and other interactive learning techniques to ensure that all participants gain an understanding of the first aid skills.

Provide First Aid Course covers the following content:

  • Basic Life Support (DRSABCD)
  • CPR and AED
  • Shock Management
  • Airway Management – Asthma, Choking, Severe Allergic Reaction, Hyperventilation
  • Cardiac Emergencies
  • Seizures and Convulsions
  • Bleeding and Wound Care
  • Burns and Scalds
  • Extremes of Heat and Cold
  • Musculoskeletal Injuries
  • Poisons and Toxic Substances
  • Bites and Stings
  • Abdominal injuries

Students will be assessed through written assessment pieces, demonstration of practical skills, participation in role plays and analysis of case studies.

Eligibility and Target Audience

There are no prerequisites for entry to this qualification.

This course targets everyone is general from administration clerks working in an office environment to aged care workers working in facilities as at any time of any day, these skills can save lives.

Outcomes

On successful completion of the course, participants will be issued with a nationally recognised Statement of Attainment.

This course is delivered under a third party arrangement with M-Sec ITS Pty Ltd, RTO Provider Number: 40671.

msec